The best paintless dent repair (PDR) in Colorado ? Throughout the 1990s, automotive paints and vehicle body materials were high quality and much more resilient to bending. Since both the paint and the body could be bent without significant damage to the paint or permanent damage to the body materials, an entire industry formed based around the concept and technology of repairing dents.
So, we've explained what the procedure looks like -- assuming it was done properly. And as you could probably guess there are a lot of ways an amateur or first-timer can get it wrong. It's different than most other car repairs because it's not about mechanical prowess; it's more about control and the ability to maintain a steady hand and a gentle pace. You can't rush it. The problem is, once a sheet metal repair starts to go awry, you're usually much, much worse off than if you'd just left it alone. Metal holds its shape, but only to a certain point. Let's say you get a dent in the hood -- nothing too drastic, just a shallow, even dent with no sharp creases in an area that's pretty easy to reach. You think it'll be easy to pop it out on your own, so you begin to massage the underside while holding your shaping tool in place. You've made good progress so far, and a casual observer wouldn't even notice the flawed area. But it's not exactly perfect, and since it's been fairly easy to this point, you decide to keep massaging the area to make it flawless. After a few more minutes of massaging, you realize that you've pushed it just a little too far. And now you've got this flabby area on the hood where you stretched out the metal. And there's no easy way to shrink it back down. Keep going and it'll stretch even more. Lesson learned.
Use Hot Glue, Wooden Dowels, & Screws: When you attempt to take out dents yourself, you always put the risk that you might further damage your car, whether you make the dent worse or chip the paint. A safe way of trying to take out big dents on your car is by using several wooden dowels, a few screws, and a hot glue gun. Simply place two nails into each side of the dowel and put the hot glue on the bottom. Place the dowels glue-side down in areas around the dent, repeat as many times as needed to cover the area, let them dry, and pull each one out until the dent is gone.
A professional job at a garage is recommended for large, deep dents or terrible damaged surfaces. The fee for fixing hail damage at garage is quite cheap and fast and sometimes require a new paint job. Besides, it is good ideas to compare offered services and prices at various auto supply stores to find out which package works best for your car's situation and your wallet.
For dents that are fairly small and not deep, a dent repair kit may be an inexpensive and simple solution. These kits are available at any auto parts store and tend to be very user friendly -- instructions are always included. The best part is that they usually cost under $40. Most include several stems for various sized dents, a glue gun and a knockdown tool. You may be surprised at how well the kit works and how professional the result looks. We don't recommend this kit for large, deep dents -- you might cause even more damage trying to fix those with a kit.
We recommend going to a professional repair service to avoid a lot of extra costs. Meet EvidentPDR in Colorado. We deliver the best workmanship and craftsmanship while relentlessly focusing on customer service, all while exceeding customer expectations. Our team is well known, highly-skilled technicians, and business-savvy professionals. Our culture and results-driven ethos is what defines our Print and Automotive shop. We make sure every customer is proud to do business with Evident PDR! Read extra details at
Paintless dent repair.
